Products & Services

Sheet-Type Waterproofing Material Evalon

Is a high-quality waterproofing material, constitutes of synthetic Elvaloy KEE from Dupont (Which is a non-migrating Plasticizer) that uses Elvaloy KEE material from Dupont. The material has received a European CE product safety standard certification.

Meet the standards of:

EUROPEAN STANDARD EN 13956

Waterproofing material details

1. Instant waterproofing Ethylene-Vinyl Acetate with a reinforced synthetic cloth sheet has a thickness no less than 1.5 mm. according to test standard EN 12311-2
2. Elongation not less than 60% according to test standard EN 12311-2
1. Tensile strength not less than 500 N/50 according to test standard EN 12311-2
2. Resistant to sunglight and UV exposure according to test standard EN 1297
3. Resistant to root penetration according to test standard EN 13948
4. Resistant to fire according to the test standard EN 13501-1
5. Resistant to stagnant conditions not less than 60 KPA according to the test standard EN 1296,1847,1928
6. Service life and warranty not less than 10 years.

Coating Waterproofing Material NANOGuard

How to install coating waterproofing material NANOGuard

In case of repairing water leakage on building walls or deck, the most effective way to install coating waterproofing material is to cover the entire area where problems occurred, instead of just the specific area, which is just a temporary fix. Here are the steps of how to install the material (steps and how to's can be modified as required, depends on the practical workspace)

Clean the affected surface or area where you would like to install the waterproofing system from any dust, sand, grit, mortar, and original waterproofing material.
Create a small grove on the cracked area in order to bury the Polyurethane Sealant deep inside. Then fix the cracks using Polyurethane Sealant.
Apply the waterproofing chemical NANOGuard ACRYLIC COATING using a brush or a roller on the first layer
Lay the fiberglass cloth mesh as the second layer to reinforce and prevent tears
Smoothen the fiberglass cloth mess with the waterproofing chemical and the practical workspace
After the waterproofing chemical starts setting up with the reinforced sheet, apply the waterproofing chemical NANOGuard ACRYLIC COATING over the layer, as the third and fourth layer. Let each layer dry and apply each layer one after the other, leaving a period of applying 1-3 hours per layer.
Precaution while working: you should not apply the waterproofing chemical while it is likely that it will rain or while it is raining

Extruded Heat Insulation XPS Foam

Extruded Polystyrene Foam (XPS Foam) is widely used along with the waterproofing material. The material is suitable for modern buildings and houses that require modern design but light-weighted. The material also insulates the building exterior from heat, capable of bearing high forces, and can be installed outside the building to prevent the heat from flowing inside.

Not only that, XPS Foam can also be installed along with waterproofing material, which makes it limitless in terms of designing the building interior which focuses on the structure and hence, is widely used by modern architects.

Installation On Metal Sheet and Fiber Cement

Most of the metal sheet roofs, when used for some time, could face problems related to anchors, silicon, or deteriorated screws, which can cause water leakage in the building. Multiple surveys from the customers reveal that they don't desire to replace their roofs because replacement could either cause damages to the interior areas or makes it a compulsion to pause the working of the machines in the factories

Our company has a solution to this problem without replacing metal sheets, which saves time and makes it a permanent fix. Not only this, but the metal sheet roof will also be able to behave as a waterproofing material, heat insulator, and reduces any noises that occur when anything falls on the sheet

Everything mentioned above is an installation outside the building, without affecting the building's interior functioning. So there's no need to pause the working of the machines in the factory or moving things out of the building.

Just like the fiber cement roofs or light-weighted building walls, they are famously known for such an installation system because the material is light-weighted, can be installed quickly, and has a long warranty. Because it's the installation outside the roof, there will be no interference on the internal ceiling, making it has no limit in designing

Installation Inside The Water Tank

Working on the installation inside the water tank, one of the most encountered problems is cracked in the concrete after using the tank for some time. This becomes a bigger problem as over time, the high-pressure water inside the tank will slowly and gently seep along the crevices of the tank, causing water leakage. The most common way to fix this is to temporarily fix the leakage, which isn't long-lasting.

Our company has a water tank waterproofing system installation service that has a long-lasting service life and helps to prevent the above-mentioned problem permanently. We have a specialized team of technicians who have been well-trained in major hospital projects and are always ready at your disposal.

Abseiling and Correction of High-Rise Buildings

Due to the continuous economic growth of Thailand, there has been a rise in the number of high-rise buildings. Fixing water leakage or other problems is challenging due to the nature of the work, including various limitations. Therefore, there's a need for a highly specialized and well-trained team of technicians who can accomplish the work.

Our company has a team of specialized and experienced technicians who are both equipped with safety measures and certificates that meet international standards to meet your needs and solve problems thoroughly